Products johnbean
product
OEM Recommendations
T3000-20 - Pneumatic Tilt Back Post Tyre Changer
Product Description:
The T3000-20 is designed to mount and demount all conventional car tyres in the market. It is equipped with a double-acting bead breaking cylinder and an oversized bead breaker blade.
- LISTED BY RENAULT
- Double-acting bead breaker cylinder
- Pneumatic tilt-back post, pneumatically locked in working position
- One-part mounting head vertically and laterally adjustable in spaced-apart position relative to the rim
- Self-centring four-jaw turntable controlled via two clamping cylinders for correct clamping of the wheel
- Plastic protection on mounting head to avoid damage to alloy rims
- Large bead breaker blade
- Ergonomic user-friendly position of the 4 pedals
- Including servicing unit, manual tyre inflator, tyre lever, plastic protections for mounting head, steel roll, plastic protections for jaws, plastic rim protection
- Optional mounting device and optional accessories for handling of PAX systems and run-flat tyres such as CSR, RFT, eufori@, EMT, DSST, SSR and Zero P
- Finish in RAL 1021
Inner clamping range (Inch)12 - 22
Outer clamping range (Inch)10 - 20
Rim width (Inch)12
Tyre width max. (Inch)12
Wheel diameter max. (mm)1000
Wheel weight max. (kg)70
Bead breaker range (mm)40 - 340
Turntable speed (rpm)7
Compressed air supply (bar)8 - 12
Power supply200-415 VAC 3ph 50/60 Hz
Dimensions - Width (mm)790
Dimensions - Depth (mm)965
Dimensions - Height (mm)1490
Noise level (dB (A))<70
Machine weight (kg)200
Manufacturers certificationlisted
MH 320 pro
The practical pneumatic bead assist device is an indespensable accessory for mounting and demounting tyres which are difficult to handle, such as low profile tyres and run flat tyre systems. It is an optimum complement to the tyre changer.
The pneumatic bead assist device is extremely rugged and specially suited for hard tyres due to its strong cylinder.
It is standard equipment on wdk-certified tyre changers T plus.- Bead breaking with the optional bead breaker disc is done dynamically during rotation of the turntable, thus preserving rim and tyre.
- The tyre bead is pressed into the drop centre of the rim by means of a roller so that the mounting head can be positioned on the rim both easily and gently.
- During the demounting operation the bead depressor presses the upper bead into the drop centre of the rim so that it can be easily levered over the mounting head nose and finally demounted without any effort.
- During the mounting operation of the upper bead the roller retains the bead under the mounting head nose. The practical bead depressor follows rotation of the wheel, doing the otherwise tedious job of the operator, while preserving both tyre and rim.
- The pneumatic bead assist device can be easily fitted by the customer.
- It is an option on T3000-20, T3000M, T4500-24 and T5000-24, but comes standard with the wdk-certified tyre changers T plus and T6000.
