Products johnbean
product
OEM Recommendations
T5000-24 plus - Pneumatic Tilt Back Post Tyre Changer for Tyres of 10"-24" Diameter
Product Description:
Equipped with the pneumatic mounting tool MH 320 and the "plus" kit this tyre changer certified by wdk in line with OEM specifications is ideally suited to handle UHP and run-flat tyres.
- Certified by wdk for gentle and user-friendly mounting and demounting of UHP and run-flat tyres in line with OEM specifications
- With pneumatic mounting tool MH 320 pro and "plus" kit (standard equipment) for handling of UHP and run-flat tyre systems (additional optional adaptors required for PAX and CSR tyres)
- Outer clamping range up to 24“
- Double-acting bead breaker cylinder
- Machine post tilted backwards / forwards upon pedal operation (pneumatic) and pneumatically locked in working position
- One-part mounting head vertically and laterally adjustable in spaced-apart position relative to the rim
- Pedal-controlled two-speed turntable (7 and 13 rpm, in 3ph version only)
- Roller-supported horizontal arm
- Self-centring four-jaw turntable controlled via two clamping cylinders for correct clamping of the wheel
- Plastic protection inside jaws and on mounting head to avoid damage to alloy rims
- Bead breaker arm infinitely adjustable
- Large bead breaker blade, supported in three joints
- Pedal-controlled inflator
- Ergonomic user-friendly position of pedals
- Tool box with integrated precision pressure gauge
- Including servicing unit, tyre lever, plastic protections for mounting head, steel roll, plastic protection for tyre lever, plastic protections for jaws, plastic rim protection, roller board
- Also available as T5000-24 without MH 320 pro and "plus" kit (not certified)
Inner clamping range (Inch)12 - 24
Outer clamping range (Inch)10 - 24
Rim width (Inch)14
Tyre width max. (Inch)15
Wheel diameter max. (mm)1000
Wheel weight max. (kg)70
Bead breaker range (mm)40-440
Turntable speed (rpm)7 / 13
Compressed air supply (bar)8 - 12
Power supply400-415 VAC 3ph 50/60 Hz
Dimensions - Width (mm)1180
Dimensions - Depth (mm)1310
Dimensions - Height (mm)1610
Noise level (dB (A))<70
Machine weight (kg)345
Alternatively:
- T5000-24 BS plus with external pedal-controlled bead seating kit
MH 320 pro
The practical pneumatic bead assist device is an indespensable accessory for mounting and demounting tyres which are difficult to handle, such as low profile tyres and run flat tyre systems. It is an optimum complement to the tyre changer.
The pneumatic bead assist device is extremely rugged and specially suited for hard tyres due to its strong cylinder.
It is standard equipment on wdk-certified tyre changers T plus.- Bead breaking with the optional bead breaker disc is done dynamically during rotation of the turntable, thus preserving rim and tyre.
- The tyre bead is pressed into the drop centre of the rim by means of a roller so that the mounting head can be positioned on the rim both easily and gently.
- During the demounting operation the bead depressor presses the upper bead into the drop centre of the rim so that it can be easily levered over the mounting head nose and finally demounted without any effort.
- During the mounting operation of the upper bead the roller retains the bead under the mounting head nose. The practical bead depressor follows rotation of the wheel, doing the otherwise tedious job of the operator, while preserving both tyre and rim.
- The pneumatic bead assist device can be easily fitted by the customer.
- It is an option on T3000-20, T3000M, T4500-24 and T5000-24, but comes standard with the wdk-certified tyre changers T plus and T6000.
